YC-300 type polytetrafluoroethylene micropowder is a low molecular weight micron-sized polytetrafluoroethylene white powder prepared by a special method.Molecular weight is 10000-3000.
Technical Parameters
Performance | Unit | Index | Test Methods |
D50(The average particle size) | μm | 3-5 | ASTM D4464 |
D99(Maximum particle size) | μm | ≤15 | ASTM D4464 |
Bulk density | g/L | 200-450 | ASTM D4895 |
Melting point | °C | 327 | ASTM D4591 |
Specific surface area | m2/g | 1.5-4.0 | ASTM D5675 |
Water content | ≤0.05 | 150°C/2h | |
Proportion | g/cc | 2.1-2.2 | ASTM D5675 |
Appearance | White | Visual inspection |
Specifications
improve the lubrictity and waterproofs materials
used in the plastic, lubricant, textile printing, and dyeing industries
1. After adding PTFE ultrafine powder, it can reduce friction coefficient and surface energy, increase antifriction, scratch resistance and non-sticky capability. It also can increase the chemical resistance and thermal endurance of Resin.
2.PTFE ultrafine powder's particle size is micron-sized, and it has high specific surface area. This powder is good for dispersing and it can improve availability factor effectively and meanwhile decrease usage amount, consequently reducing usage cost synthetically.
3. It possesses good self-lubricating property which can be used for dry lubrication of sliding parts.
4. Adding small amount of PTFE ultrafine powder(0.2~3wt%) and some other antiflaming additive to the substrate will improve itscombustion behavior and annealing behavior, especially drippage character of high-value polymer, such as PC, ABS copolymer.
5.It is easy and convenient to transport and stock.
6. It has good chemical resistance and good thermal endurance
improve the lubrictity and waterproofs materials
used in the plastic, lubricant, textile printing, and dyeing industries
1. After adding PTFE ultrafine powder, it can reduce friction coefficient and surface energy, increase antifriction, scratch resistance and non-sticky capability. It also can increase the chemical resistance and thermal endurance of Resin.
2.PTFE ultrafine powder's particle size is micron-sized, and it has high specific surface area. This powder is good for dispersing and it can improve availability factor effectively and meanwhile decrease usage amount, consequently reducing usage cost synthetically.
3. It possesses good self-lubricating property which can be used for dry lubrication of sliding parts.
4. Adding small amount of PTFE ultrafine powder(0.2~3wt%) and some other antiflaming additive to the substrate will improve itscombustion behavior and annealing behavior, especially drippage character of high-value polymer, such as PC, ABS copolymer.
5.It is easy and convenient to transport and stock.
6. It has good chemical resistance and good thermal endurance
Add and usage
It can usually be added by a sanding machine, a ball three-roller or a high-shear dispersing device, and stirred at a high speed of 1600 rpm. At the same time, when adding the micropowder, it should be added in small amounts to make the micropowder fully moisturized.
Applications
1. This product is added to the coating to improve the viscosity and lubricity of the coating and improve scratch and friction resistance.
2.This product is added to the ink to increase the anti-blocking and hydrophobicity of the ink, and at the same time increase the friction and scratch resistance of the ink after molding.
The product is added to the lubricating oil, which can significantly improve the quality of the oil, increase the anti-friction and load-carrying ability of the lubricating grease, enhance the aging performance of the lubricating grease, and enhance the high-temperature performance of the lubricating grease and form a friction polymerization of the lubricating grease. membrane. The lubricating grease added to the product can be lubricated when the oil film is damaged under low-speed, high-temperature 'corrosive environment and high load conditions.
Anhui Yuanchen Environmental Protection Science and Technology Co., LTD, was founded in 1997. The company is a High-tech industry, specializing in 3D printing powder,PTFE powder and dust filter bag.Our products covers nylon powder,ceramic powder,metal powder PTFE powder. ISO900114001 approved manufacturer, advanced experimental instruments introduced form Europe, CNAS Laboratory certificate and third party testing qualification CMA,Yuanchen focus on scientific and technological development to make sure quality and productivity.Our market includes all of China, and also export to Germany, Russian, South America, Europe, South East Asia and many other countries.
Packing and Delivery
FAQ
2.This product is added to the ink to increase the anti-blocking and hydrophobicity of the ink, and at the same time increase the friction and scratch resistance of the ink after molding.
The product is added to the lubricating oil, which can significantly improve the quality of the oil, increase the anti-friction and load-carrying ability of the lubricating grease, enhance the aging performance of the lubricating grease, and enhance the high-temperature performance of the lubricating grease and form a friction polymerization of the lubricating grease. membrane. The lubricating grease added to the product can be lubricated when the oil film is damaged under low-speed, high-temperature 'corrosive environment and high load conditions.
Anhui Yuanchen Environmental Protection Science and Technology Co., LTD, was founded in 1997. The company is a High-tech industry, specializing in 3D printing powder,PTFE powder and dust filter bag.Our products covers nylon powder,ceramic powder,metal powder PTFE powder. ISO900114001 approved manufacturer, advanced experimental instruments introduced form Europe, CNAS Laboratory certificate and third party testing qualification CMA,Yuanchen focus on scientific and technological development to make sure quality and productivity.Our market includes all of China, and also export to Germany, Russian, South America, Europe, South East Asia and many other countries.
Packing and Delivery